Page 1 of 1

issue-#210 SYSTEM.ADR(ProcedureType) should be supported

Posted: Wed Jul 29, 2020 4:52 am
by Josef Templ
I have created this issue as proposed by luowy and Ivan.
For the issue see https://redmine.blackboxframework.org/issues/210

For the original discussion see viewtopic.php?f=40&t=755

The changes so far are in https://redmine.blackboxframework.org/p ... 9e59a688be

The docu is not yet updated.

- Josef

Re: issue-#210 SYSTEM.ADR(ProcedureType) should be supported

Posted: Mon Aug 03, 2020 8:29 am
by Josef Templ
can anybody outline the usage of the reintroduced feature?
In other words, what can be done with SYSTEM.ADR(PtocType) and how can it be tested if it works as expected?

- Josef

Re: issue-#210 SYSTEM.ADR(ProcedureType) should be supported

Posted: Sun Aug 16, 2020 10:35 am
by Ivan Denisov
This is used in armBox project
https://community.blackboxframework.org ... f=29&t=252

So Build/build.odc should executed well with CPfront installed

CPfront uses front-end of BlackBox compiler.

Re: issue-#210 SYSTEM.ADR(ProcedureType) should be supported

Posted: Mon Aug 17, 2020 10:52 am
by Josef Templ
Can it be tested in BlackBox for Windows?

Re: issue-#210 SYSTEM.ADR(ProcedureType) should be supported

Posted: Tue Aug 18, 2020 1:07 am
by Ivan Denisov
Yes!
Install CPfront, then run commands from Build/build.odc file.